Sponsors

Raising the alarm on pneumatic tube systems

For many years, pneumatic tube systems (PTS) in hospitals have interfaced with local Building Management Systems (BMS) to relay fault warnings. However, there are now significant changes on the horizon. Having been involved in the design and delivery of PTS for the New Hospital Programme, Tom Hughes, managing director of Aerocom (UK) Ltd, looks at whether a more sophisticated approach to monitoring can actually change the way pneumatic tube systems are maintained.

Historically, most BMS (Building Management System) interfaces from a PTS (pneumatic tube system) have been relatively simple. A fault condition within the PTS control system operates a relay, providing an open or closed signal to the BMS. In practical terms, this is often little more than a two-core NO/NC cable connected to a warning lamp or monitoring system. The PTS identifies a fault, activates the relay, and the BMS receives the alarm.

It works, but it provides very little information.

The requirement for server-based PTS control systems capable of interfacing with the new generation of Command & Control Centre BMS servers introduces a completely different level of monitoring capability. The question is whether that additional information will actually improve the way faults are managed.

Log in or register FREE to read the rest

This story is Premium Content and is only available to registered users. Please log in at the top of the page to view the full text. If you don't already have an account, please register with us completely free of charge.

Latest Issues